Machine à panneaux muraux «Ship Deck»

Catalog Machines à former les rouleaux Machines à panneaux muraux Machine à panneaux muraux «Ship Deck»

Le revêtement métallique «ShipDeck» est un matériau très populaire utilisé comme revêtement pour les bâtiments à plusieurs étages. Ce type de revêtement en métal est particulièrement apprécié pour le revêtement de maisons privées.

Les avantages de «ShipDeck»:

résistance aux changements brusques de température;
pas d'inflammabilité;
résistance à la corrosion, résistance accrue aux précipitations atmosphériques, aux environnements ultraviolets et agressifs;
faible coefficient de dilatation thermique;
caractéristiques de résistance élevée, résistance aux influences mécaniques;
facilité de fabrication, commodité et fiabilité de l'installation (installation rapide à tout moment de l'année);
attaches cachées;
le panneau de revêtement vous permet de réduire le coût du chauffage de la maison (toutefois, le revêtement respire, car il n'est pas fermé hermétiquement);
aspect attrayant
la sécurité environnementale

Vous obtenez ainsi un revêtement peu coûteux et esthétiquement attrayant qui peut changer l’aspect du bâtiment.

Société «Russa Engineering» offre pour votre compte machine à panneau mural «Ship Deck».
La machine à panneaux muraux «Ship Deck» fait partie intégrante de la ligne de profilage.
Cette ligne de profilage de panneaux est fiable, pratique à utiliser et produit un produit final de haute qualité.

DISTINCTIVE FEATURES

High production speed.

Variety of wall panel types.
For today, there are lots of metal wall panel types.
Company «Ruscana Engineering» is ready to offer you a standard metal panel types and develop and manufacture machine to produce original look wall panel in accordance with your sketch.

Consistent roll forming method.
Consistent roll forming method provides high-quality roll forming of raw materials from different suppliers.
Roll forming starts from the center, gradually spreading over the entire surface of the metal sheet, thereby relieving tension in the metal.
This method allows you roll form raw materials of different quality.

Automatic control system (ACS).
Automatic control system or ACS is based on hardware Omron (Japan) which meets reliable performance. The company «Ruscana Engineering» has developed a very user-friendly interface with various controlled parameters, such as: feeding speed, quantity/length of products, production task and many other. The system is also equipped with alarm and error indicators and support information as well as maintenance service information.

Quality components.
Quality electronic, hydraulic and pneumatic components of the leading industry suppliers: spherical, self-centering bearing units (Askubal, Germany); hydraulic and pneumatic components (Made in Italy); electronic components (Omron, Japan).

The shafts of the rolling mill are made of solid rolled steel and is being heat treated and polished, which makes it possible to achieve a high resistance to deflection and to minimize beating.

Volume hardening of profiling rollers, allows to increase their life in 50 times

Safety.
The rolling mill zone and drive mechanisms are covered with protective covers, which ensures safe working conditions and excludes direct entry of dust, moisture and foreign objects.

Competitive price.

The price of equipment is lower than European and North American manufacturers have for similar equipment.

Warranty and post warranty service.

GENERAL INFORMATION

Raw material requirements
Material	Light-gauge galvanized steel with polymer coating: polyester, plastisol Zinc coating to range 100…275 g/m² Yield strength 280…320 N/mm²
Coil thickness	0,38 mm up to 0,6 mm
Coil width	312,5 mm±2mm
General characteristics
Line operating mode	adjustable/automatic
Installed power capacity, no more than	9 kW
Roll forming speed, no more than	20 m/min
Supply voltage at frequency of 50 Hz	380 V
Supply voltage at frequency of 60 Hz	230 V 3 phase
Dimensions (LxWxH), no more than	13300х2080х1450mm (receiving table is included)
Weight, no more than	3800 kg
Required operation personnel	1-2 persons
Line configuration
1. Decoiler
2. Preliminary punching module (integrated into roll forming section)
3. Roll forming section
4. Hydraulic guillotine
5. Roller base receiving table ( 4 pcs.)
6. Automatic Control System (ACS)

Configuration:	Profile drawing
Decoiler Roll-forming section Roller base receiving table, 4 pcs. Automatic control system (ACS)

Download PDF file